Ceramic tiles have very different and are ideal candidates to spruce up your room and make them bright and colorful. Are cheap compared to granite or marble and is available in different styles and shapes. When properly installed, can provide years of rough use without any maintenance.
Tile Selection
Be careful not to choose the right size of the tiles to complete your room seems to be necessaryShare. If the tiles are too small, they often look at the board and make the room look cluttered. At the same time, the tiles are large very strange, especially when installed in tight spaces. The smallest is a tile 1 inch by 1 inch to 12 inches by 12 inches tiles. Most popular formats tiles ranging from 3×3 to 4×4.
Tiles that are in range of a glazed tile, which has "a certain pattern glass" or fired at a mosaic that is ideal for any surface because they resist moisture and will not chip, natural stone tiles that are made with a mixture of clay and are usually able simple unglazed.
Full tile
Set the tile on the floor without glue. Make sure the plastic bags on the tile spacers between tiles to keep them in a uniform distance throughout. Layout, how many full-time employees> Tiles, as you can until you are on the walls of the room. Start in a corner and paste sections 2×2 square. Lay the tile and press into glue. Use a soft hammer slightly ease tile adhesive. Keep spacer in place to ensure that the tiles are distributed evenly. Next apply glue 2×2 sections and the rest with full tiles. Let the tiles on the full rateNight.
Border tiles
Lay the tiles on a tile border complete, so hitting the side walls des Create a line on the tile where it intersects the tile full. Use a tile cutter or tile, tile cutter so the border. Glue the tiles and tiles full attention to work in the border region. Let it set overnight.
Add Grout
The next step, which is relatively simpleOne, together with mortar. Injection mortar joints is a wall filling, fractures, etc. Grout can be purchased either in the form of standard cement-colored or colored in a certain color form used. Note also polluted the white or bright colors in time. mortar hardens and eventually used as a liquid for filling joints between tiles and give a good fit. Make sure you follow the manufacturer's instructions when using grout. Also use the right kind ofinstrument used as a swimmer, the mortar has a rubber-coated tool for the dissemination of smoothing putty. Apply mortar liberally on every stone 45 degree angle. Remove the excess grout with a sponge or a damp cloth to be careful not to pull grout between tiles. Wiping applications, the justification for a week, will also help set grout is completely cured.
Installing ceramic tile is not very complicated, but it takes time and patience. Also, if not done correctly, thatThe cost of replacing tiles begin to add up. Further information on procedures and guidelines that can help just a beginner and painless to install ceramic tiles in your home.
Related posts: